BIKES
INFO
IDWORX
DEALERS
SERVICE
12 REASONS
English
- Deutsch
- Nederlands

BIKES
INFO
IDWORX
DEALERS
SERVICE
12 REASONS
English
- Deutsch
- Nederlands

0 Configurations

Speak to Gerrit

Speak to Gerrit!

idworx details

Perfection in essence

It’s all in the details. Our engineers worked a whole year long on our new idworx ‘travel spec’ fork. Our objective: the most thought-through and perfect front fork ever made for trekking bikes. The tapered fork tubes and oversized fork legs form the basis. The strategically soldered and reinforced cams with wiring for the lamps, the guide for the brake line and the fitting of the carrier, mudguard and our lamp bracket that has frequently been copied, are all characteristic of idworx. The fitting for the lamp holder is also new and we have done it without drilling any holes through the crown of the forks or the fork tubes thus ensuring it will be extra strong and hardwearing. To complete the picture, the hub dynamo that we developed specially with SON, has a 15mm thru axle and plugless bonding. — idworx travel spec fork with thru axle and SON-SL (plugless) hub with boosted standard

Mud will not be slowing you down either, as the custom-made Super Sym Yoke has plenty of space for 29" and 27.5" plus tyres. — Super Sym Yoke

Thanks to the milled aluminium connector between the rack’s two mounting bars – a standard feature on 'travel spec' models and the Power Rohler – the bike remains very stable, even with lots of luggage. — idworx The Brace

All of our idworx trekking bikes are fitted with a divisible, forged back-pad on the chain side of the frame that can be equipped with belt drive. — Belt ready frames

The Long Life chain ring we developed at idworx made of hardened stainless steel with an uneven number of teeth together with the extra-hardened idworx KMC X1 chain and Rohloff steel sprocket, makes for unprecedented longevity. In our oPinion models we even fit our Long Life chain ring back and front. Chain tension requires less frequent checks - a pleasing consequence of a more wear-resistant drive. — idworx Long Life drivetrain

Our eccentric bottom bracket with specially designed stainless steel bearing. We weigh every bearing to be sure it’s completely filled with grease. — idworx EBB Long Life

Developed together with SON with adapted deflector for better view, also just in front of your bike. — idworx SON Edelux II with CNC lamp holder

Directly mounted to the frame for a lighter, better performing brake. Changing and adjusting brake pads in litterally one minute. idworx was the first to use this remarkable brake in this manner. — Magura FIRM-tech hydraulic brakes

The steering angle is limited meaning that cables, brake lines and the upper tube are less likely to get damaged during a fall. In addition, trekking bikes with full low-rider bags won’t fall over due to the steering wheel turning of its own accord. By applying the iSR along with smart cable guides, we can work with shorter gear cables and ensure smoother gear changes. This is just another example of idworx going that extra mile. — idworx Stress Reducer

Developed especially for the idworx oPinion and Power Rohler, the very solid executed dropouts enable easy and precise adjustments to be made to chain tension. This construction makes it almost impossible to build in the rear wheel askew. — Synchronously adjustable dropouts

prevents the shift cables from kinking, no matter if it’s in combination with an optimized cable routing, during transport or in everyday life. — idworx cable protector

the DaCover chain/belt drive guard protects the drivetrain from the main contaminents, such as sand, water and dirt. It also reduces the risk of the rider’s trousers getting dirty or getting into the drivetrain. Extra safety and less wear. — idworx DaCover chain/belt drive guard

for more stiffness of the front wheel — idworx / SON Widebody hub-dynamo

with large 203 mm and a thickness of 3,2 mm heavy duty use of traveling bikes — idworx Big Disc (iBD)

for OR-Evo, ER-Evo, AR — idworx chaincase

the connection between the electrical parts as safe as possible — idworx cable loom

DaCage Bottleholder

DaCage Bottleholder

Low-squeal brake pads

Darim lite carbon rims

Bike Basics GmbH | idworx Bikes | Siebengebirgsblick 20, 53343 Wachtberg | Tel: +49 228 184700 | Fax: +49 228 18470299 | info@bikebasics.de | Imprint – Disclaimer

© idworx - live 2021
Privacy PolicyBuilt with Storefront & WooCommerce.